SIG 3D Mayhem ARF
| Specifications | ||
| Wingspan: | 72- 1/8 in | 1832 mm |
| Wing Area: | 1167 in² | 75.3 dm² |
| Fuse Length: | 59 in | 1500 mm |
| Flying Weight: | 7 - 8 lbs | 3175 - 3630 g |
| Engine Required: | .72-.91in³ (11.8 - 15 cm³) 2-Stroke Glow .72-1.20 in³ (11.8 - 20 cm³) 4-Stroke Glow | |
| Radio Required: |
4 channel, 5 servos. | |
Over the past several years, aerobatics has taken on a whole new dimension. 3-D flying has grabbed hold and more airplanes are dancing in the air than ever before. Now you too can perform these totally X-treme manoeuvres with the SIG 3D Mayhem ARF. |
This is not just your average aerobatic flyer. The 3D Mayhem incorporates all the engineering required to bring 3-D aerobatics to your field. Generous wing area, lightweight construction and outrageously huge control surfaces with gargantuan throws; all limited only by your skills. |
The 3D Mayhem is generously constructed of the finest balsa and plywood available, then covered in a crowd pleasing red, white and blue finish using tough Aerokote polyester film. Final assembly is all yours, but with SIG's complete hardware package and fully illustrated assembly manual, you can't go wrong. |
Inside the box, you'll find a pull-pull rudder assembly, twin aileron servo mounts, short-coupled elevator mount, dural aluminum landing gear, scale tail wheel assembly and matching painted fiberglass cowling and wheel pants. Outside the box is how you'll fly. |
| Sig's 3D Mayhem ARF It's controllable chaos in a box. |