Kadet LT-25 Model Airplane
Click to enlarge - Double Click to reduce
Kadet LT-25 Model Airplane

Since its introduction, the SIG KADET LT-40 has become the R/C trainer of choice at many club fields, Not long after its introduction, we started getting requests for a smaller version of the same airplane. So the compact version of the LT-40 was born - the SIG KADET LT-25. As you would expect, the new LT-25 inherits all the same gentle flying characteristics of the other legendary SIG KADETS.
It has the same light wing loading, which allows it to fly slow enough to give the student pilot time to think and react. It has the same "hands off" stability on all axis. If the student pilot gets disoriented, simply let go of the sticks and the LT-25 will recover and return to level flight within seconds. Kadet LT-25 Model Airplane
In addition, the new KADET LT-25 has a couple of features that are "firsts" for any SIG KADET.
  • It's the smallest "full-house" 4-channel KADET we've ever produced, with ailerons, elevator, rudder, and throttle control standard.
  • It has a taildragger landing gear! In the interest of keeping the flying weight of this little gem as light as possible, we've elected to go with the simplicity of a taildragger landing gear. With a wide-stance main gear and a shallow angle of attack on the ground, the LT-25 takes off and lands just as easily as most tricycle gear models.
  • Last, but not least, it's the first SIG KADET that is all laser cut! The CAD drawn plans and CNC (computer controlled) laser cutter insure the parts fit perfectly. You've never built a kit that went together this good!
Wingspan 63 in 1600 mm
Wing Area 724 sq in 46.7 dmē
Length 50.75 in 1289 mm
Flying Weight 4 - 4.25 lb 1814 - 2041 g
Wing Loading 12 - 13 oz/sq ft 39 - 44 g/dmē
Radio Required 3-Channel with 4 Standard Servos (not included)
Engine Required
(not included)
2-Stroke .25 - .32 cu in (4.1 - 5.2 cc)
4-Stroke .20 - .26 cu in (3.3 - 4.3 cc)

KIT FEATURES
  • Light Weight Balsa Structure
  • Strong Wing Design
  • Engine Mounts
  • SIG Easy Hinges
  • Decals
  • Complete Pushrods and Hardware
  • Pre-Shaped Balsa Rudder
  • Easy-To-Build Interlocking Balsa Fuselage
  • Pre-Shaped Balsa Leading Edges
  • Pre-Shaped Balsa Trailing Edges
  • Pre-Shaped Balsa Ailerons
  • Pre-Shaped Balsa Elevator
  • Photo-Illustrated Assembly Manual
  • Formed Aluminum Main Landing Gear
Kadet LT-25 Kit Instruction Manuals
Click each title to open in a new window.
Introduction
Main Construction
Covering & Finishing
Complete Pdf (3.0 Mb) Download


For more information and option to buy link to:
www.sigmfg.com