|Click to enlarge - Double Click to reduce|
The Sig Ultimate Bi-Plane Fun Fly was modeled after one of the most recognized airplanes on the air show circuit today - the
Ultimate 10-300. This bi-plane has captured the imagination of many modelers with its simple, yet distinctive, looks and outstanding flight performance.
Following in the footsteps of the popular SIG Fazer, the Ultimate Fun Fly is an easy to build all wood design with a profile fuselage and
traditional build-up balsa wings.
The flight performance of the Ultimate Fun Fly is AWESOME! Super tight loops, lightningfast rolls, flat spins, knife edge flight, and hovering are just a few of the maneuvers, that this
model can perform.
| The CAD (Computer Aided Drafting) drawn plans, computer generated tooling, and laser cut parts ensures the modeler that all the parts will fit
precisely the way they were intended. The laser cutter has allowed us to design the parts in this model to greatly simplify its construction. One other benefit of the laser cutter is that all the
critical alignment holes in the cabane and interplane struts are pre-cut allowing the wings to be set at their proper incidences during assembly.
||798 sq in
||13 oz/sq ft
|4-Channel with 5 servos|
(2 aileron, 1 elevator, 1 rudder, and 1 throttle)
|2-Stroke .32-.46 (5.2 - 7.5 cc)|
4-Stroke .40-.50 (6.5 - 8.2 cc)