1/6-Scale
| Wingspan | 56 in | 1422 mm |
| Wing Area | 557 in² | 36 dm² |
| Radio Required | 4-Channel | |
| Recommended Engines |
.25 - .40 in³ (4 - 6.5 cm³) 2-Stroke .40 - .45 in³ (6.5 - 7.3 cm³) 4-Stroke | |
| In 1969 Hazel Sig, when President of Sig Mfg. Co., rebuilt a standard 1941 Piper J-3 Cub for airshow flying. To increase the plane's aerobatic
performance, 40 inches were clipped off each wing panel and the engine was reworked for greater horsepower. The result is a highly aerobatic Cub that is a real joy to fly! Smooth aileron rolls, snap rolls, immelmann turns, and many other rolling maneuvers which are difficult in a standard wing J-3, are easy with the Clipped Wing Cub. This 1/6-scale model inherits all of the delightful flight characteristics of Hazel's full-scale Clipped Wing Cub. |
- Kit Features:
- Built-Up Balsa Construction
- Strong One-Piece Wing
- Die-Cut Parts
- Spruce Wing Struts
- Full-Size Plans
- Molded ABS Plastic Engine Cowling
- Formed Wire Landing Gear
- Authentic Decals
- Illustrated Instruction Book
1/4 scale pictured