Kadet EP-42B Brushless ARF

Electric Powered Trainer w/Brushless Motor and Speed Control

The Kadet EP-42B ARF was conceived as the very definition of an R/C electric trainer. In the air, the Kadet EP-42B ARF has a large speed envelope, allowing it to be flown as slowly as needed for beginning pilots.

Specifications Wingspan 42 in 1067 mm Wing Area 330 in² 21.3 dm² Fuse Length 34 in 864 mm Flying Weight 24-26 oz 680 - 737 g Battery Required 3-cell 900 - 1400 mAh Lithium Polymer Radio Required 4 channel, Micro receiver, 4 Micro servers

The SIG Kadet EP-42B ARF is truly a "quick build"! Includes factory installed windows, a "quick change" battery hatch, pre-wired, powerful RCS SIMPLEX3D brushless motor and 18 amp ESC, 8-1/2 x 8 propeller, quality hardware, cowling, fully illustrated, step-by-step assembly manual, and decals. Available in two color schemes, the Kadet EP-42B ARF is meticulously covered with SIG AeroKote-Lite® film. Controls: rudder, elevator, ailerons, motor.

Wind? The included RCS brushless motor is whisper quiet and powerful, fully capable of flying the Kadet EP-42B ARF smoothly through most any normal wind conditions. RC SYSTEM Simplex3D is a brushless outrunner motor and matched speed controller set included with the Kadet EP-42B providing plenty of power for 3D aerobatic models up to 14 oz (400 g) or sport models up to 35 oz (1000 g). Simplex3D Specifications Weight 2 oz 55 g Battery 2 - 3 Li-Po Propeller 9 x 4 - 10 x 4.7 in Max loading 12 A ESC 18 A continuous max. BEC 5 V /1.5 A Input 2 - 3 Li-Po/6 - 12 Ni-Mh For more information and option to buy link to: www.sigmfg.com